Raymond Mill Interior Temperature

Raymond Mill Interior Temperature

Raymond mill's temperature inside the cabin and the temperature of the components are too high. These two conditions must not be overlooked. Let's find out why. Raymond Mill is a very common milling equipment in the milling industry. It is suitable for grinding all kinds of non-flammable and explosive mineral products with a Mohs hardness below 9.3 and humidity below 6%. In some cases, Raymond Grinding will experience excessive temperature during its use. There are two main conditions: high cabin temperature and high component temperature. Many people do not know how to solve it. This article mainly discusses the causes and solutions of Raymond Mill's overheating.

Raymond Mill parts temperature is too high

It is a normal phenomenon that part temperature rises during Raymond milling. Because, with the increase of equipment operation time, the friction time between parts and materials, parts and components is getting longer and longer, which will inevitably lead to the situation of temperature increase. However, if the temperature of Raymond's grinding parts is too high, attention must be paid. If the temperature is too high, it will not only reduce the production efficiency of the equipment, but also may cause great harm to Raymond's grinding.

Raymond Mill Interior Temperature Raymond Mill Interior Temperature
  1. 1, the bearing temperature is too high. Lubrication of bearing parts has a great influence on the efficiency and quality of the entire milling equipment. If the bearing is improperly maintained, the replacement of the lubricating oil cannot be promptly added in accordance with regulations, or the bearing part is not tightly sealed, resulting in more grease generation, which will increase the frictional resistance of Raymond's grinding bearings, which in turn causes the temperature of Raymond's grinding bearing components. Too high. In order to prevent Raymond Mill's bearing temperature from being too high, it is necessary to add lubricating oil in a timely manner, and to ensure the cleanliness of the lubricating oil, and to prevent contamination of parts such as dust and impurities.
  2. 2, the grinding roller ring temperature is too high. In the milling production, the grinding roller ring is a part that directly contacts the material, so the friction force is large and damage is easily formed. In view of this situation, when we use Raymond Mill, we must pay attention to the hardness and particle size of the material to be ground in order to reduce the friction of the grinding roller ring. After the grinding operation is performed for a period of time, it is necessary to pay attention to the rest of the machine. If the wear of the component is serious, be sure to replace it with a new one in time.
  3. 3, fan temperature is too high. When Raymond Mill is running, sometimes we unconsciously touch the fan equipment, which causes the wind pressure of the fan to change and cause the motor to heat up. When the fan temperature is too high, it will seriously affect the normal operation of Raymond Mill. Therefore, when using Raymond Mill, do not avoid this situation.

Raymond mill's temperature inside the cabin is too high

Raymond mill's excessive temperature inside the cabin is mainly caused by four reasons:

  1. 1. The temperature inside Raymond mill's cabin is too high, mainly because the grinding process requires a lot of friction and pressure to grind the material, so how to reduce the friction is the most important thing. Regularly adding high-performance lubricants to components such as bearings and grinding rollers can not only solve the problem of frictional heating, but also increase the flexibility of various components and increase the production capacity of Raymond Mill.
  2. 2. Pay attention to the problem of ventilation. In the dust removal position, the external air can be removed, and the external air flow and the air flow in the cabin can be convected to slowly lower the temperature in the grinding chamber. If necessary, install a high-power exhaust fan to cool the room.
  3. 3, high wind pressure causes the fan to heat, which makes the fan temperature is too high. When Raymond Mill is running, unintentional touch may cause the wind pressure of the fan to change and cause the motor to heat up. When the fan temperature is too high, it will seriously affect the normal operation of Raymond Mill. Therefore, when using Raymond Mill, this kind of situation should be avoided.
  4. 4. The reason for the equipment itself, such as the quality of the equipment, does not matter. This requires the user to carefully select large brands and high-quality equipment at the time of purchase.

In order to make Raymond Mill's fast and efficient operation, we must make corresponding adjustments according to the actual situation of the equipment. For example, properly adjust the ventilation of the Raymond Mill room and open the ventilation ducts of the equipment so that the Raymond Mill indoor and outdoor air streams can operate convectively to avoid excessive temperatures in the Raymond Mill room. In addition, normal maintenance is also very important, so regular maintenance of Raymond Mill is needed to extend the service life of the equipment.

Get Price And Support

Simply complete the form below, click submit, you will get the price list and a Zenith representative will contact you within one business day. Please also feel free to contact us by email or phone. ( * Denotes a required field).