Small Iron Ore Processing Production Line Supplier

Small Iron Ore Processing Production Line Supplier

Small Iron Ore Processing Production Line Supplier

Small iron ore production line of low cost, ease of relocation and moving, better able to adapt to policy changes, risk aversion also strong. To meet the production needs of the premise, we believe that our customers should be more willing to choose high quality and perfect small iron ore production line. Based on a deep understanding of mining crushing process and equipment technology solutions for the long-term accumulation, Zenith is engaged in mining crushing processing enterprises to provide high-quality equipment and efficient service, and create tremendous value for our customers. Our products have been sold to 120 countries and areas of Southeast Asia, East Europe, South America, the Middle East and Africa etc, and more foreign markets will be promoted in future. As a small iron ore processing production line supplier, if you have questions, you can contact with our customer service staff, we will provide you with sincere service.

Small Iron Ore Processing Production Line Introduction

1.Mining iron ore begins at ground level. Taconite is identified by diamond drilling core samples on a grid hundred of feet into the earth. Taconite rock comprises about 28 percent iron; the rest is sand or silica. These samples are analyzed and categorized so that mining engineers can accurately develop a mine plan.To uncover taconite reserves, the mine area is first "stripped" of the overburden or glacial drift, comprised primarily of rock, clay and gravel. The overburden is loaded by large hydraulic shovels into production trucks, which haul it to contour dumps.

Small Iron Ore Processing Production Line Supplier Small Iron Ore Processing Production Line Supplier

2.These dumps are environmentally designed to match the surrounding area. Once the taconite rock is exposed, large drilling rigs drill blast holes 16" in diameter by 40' deep, in some cases. Nearly 400 of these holes are drilled in a blast pattern. Before the blast, the holes are filled with a special mixture of blasting agents. Once prepared, the mine site is cleared of workers and equipment, and the blast is detonated. Each of the holes is detonated just a millisecond apart, resulting in a pile of crude taconite that is broken apart to a minus 6' x 6' size.

3.After blasting, hydraulic face shovels and larger loaders load, the taconite into 205-ton or 240-ton production trucks, which haul it to crushers. The taconite is ground to a fine powder and mixed with water. A series of magnets is run over the mixture. The magnets grab the iron particles and the rest is discarded. For every ton of iron retained, two tons of waste, or tailings, are discarded.

Get Price And Support

Simply complete the form below, click submit, you will get the price list and a Zenith representative will contact you within one business day. Please also feel free to contact us by email or phone. ( * Denotes a required field).